Frequently Asked Questions

1. Please go to video manage>click “repeater”.
2. At the page of repeater, you will find it each camera is connected to the NVR by green and red lines.
Green line means the camera is now connecting to the system, while the red line means this channel is
disconnected. We can setup the repeater on the channels that are connected by greenlines.
2. For example, channel 2 and channel 4 are not mounted so far away from eachother.
Channel 2 has good signal, but channel 4 does not, and sometimes channel may even disconnect.
So we can setup the repeater function on channel 2 to strengthen the signal on channel 4.
But we need to setup the repeater only when channel 4 is connected. (As I stated, a camera cannot be
added by repeater function when this camera is disconnected and showing red line.)