Installation guide

SV-CLCD56BA/70BA Quick Installation Guide June 2010
SV-CLCD56BA_70BA QIG Ver.1.1d.doc 2
Supplied Hardware
The following hardware is supplied for installation with
each SV-CLCD56BA/70BA system:
Hardware Item Quantity
SV-LCD56BA/70BA Monitor 1
Monitor Cable 1
Monitor Mounting Bracket 1
Monitor Screw Kit 1
SV-625B Camera 1
Camera Extension Cable (65-foot) 1
Camera Sun Visor 1
Camera Mounting Bracket 1
Camera Screw Kit 1
System Components
SV-LCD56BA/70BA Monitor
A
POWER LED—indicates that the monitor has power
B DAY/NIGHT SENSOR—senses available light and
adjusts monitor brightness accordingly
C MENU BUTTON—initiates display of onscreen user
controls for image contrast and brightness and
speaker volume
D + BUTTON—UP button—increases the value for
Setup menu items, such as Volume
E – BUTTON—DOWN button—decreases the value
for Setup menu items, such as Volume
F POWER/CAM SELECT BUTTON—when pressed
and held for 1 second, turns the monitor ON or OFF;
when pressed briefly, switches image input)
G NORMAL/MIRROR SWITCH—switches image
display to Normal or Reverse (as it would appear in
a rear-view mirror)
H MONITOR CABLE—receives power and camera
images from the camera
I BRACKET SLOT—accepts the adjustable mounting
bracket
SV-625B Camera
A Infrared LEDs—generate light to compensate for
low-light situations
B INTEGRATED MICROPHONE
Optional Components
In addition, devices other than the components supplied
with the SV-CLCD56BA/70BA system (such as an
additional camera) can be connected to the system.
See the procedure to activating a second camera
input on page 4.