Installation guide

RouteRecorder® 4C Installation Guide July 2009
 Main Wiring Harness Connection to MDVR
Pin configuration for the 36-pin connector of the MDVR
main wiring harness is as follows:
ROUTERECORDER 4C IG Ver 1.3.docx 4
Pin Pin Function Pin Pin Function
1 Ground 2 Left Audio Out
3 Ground 4 Right Audio Out
5 Ground 6 Video Out
7 Ground 8 Ignition
9 Ground 10 Audio In 1
11 Ground 12 Video In 1
13 Ground 14 Audio In 2
15 Ground 16 Video In 2
17 Ground 18 Audio In 3
19 Ground 20 Video In 3
21 Ground 22 Audio In 4
23 Ground 24 Video In 4
25 -12V Camera 1 26 +12V Camera 1
27 -12V Camera 2 28 +12V Camera 2
29 -12V Camera 3 30 +12V Camera 3
31 -12V Camera 4 32 +12V Camera 4
33 Main Power (-) 34 Main Power (+)
35 Main Power (-) 36 Main Power (+)
 Sensor Wire Harness Connection to MDVR
Pin configuration for the 24-pin connector of the MDVR
sensor wire harness is as follows:
Pin Pin Function Pin Pin Function
1 Ground 2 Trigger 1
3 Ground 4 Trigger 2
5 Not used 6 Trigger 3
7 Not used 8 Trigger 4
9 Ground 10 Trigger 5
11 Serial 1 Transmit 12 Trigger 6
13 Serial 1 Receive 14 Trigger 7
15 Ground 16 GP output 1*
17 Serial 2 Transmit 18 GP output 2*
19 Serial 2 Receive 20 12V out (current limited)
21 Ground 22 Ground
23 Ignition Input
Indication
24 Not used
*NOTE:
See Comments section in System Setup Menu
section.