Installation guide

RouteRecorder® 4C Installation Guide July 2009
ROUTERECORDER 4C IG Ver 1.3.docx 2
System Components
Components of the RouteRecorder® 4C system are as
follows:
MDVR
Ï MDVR (Part Number SV-4CHDDVR)
A DIRECTIONAL BUTTONS—have the following
functions, depending on the current mode:
 When video is being played back at normal speed
(1X):
y UP—cycles up from Channel 1 through Channel
4 and the quad view for audio/video output
y DOWN— cycles down from Channel 4 through
Channel 1 and the quad view for audio/video
output
y LEFT—adjusts fast-reverse video playback
speed to a maximum of 90X
y RIGHT—adjusts fast-forward video playback
speed to a maximum of 90X
 When playback video is paused:
y LEFT—reverses video playback one frame at a
time
y RIGHT—advances video playback one frame at
a time
 When video is not being played back, these buttons
move the cursor through on-screen menu
selections, and the RIGHT button functions as an
ENTER key by confirming menu selections.
 When the DVR is in Record or Standby mode, the
UP and DOWN directional buttons are used to
cycle input between Channel 1 through Channel 4
and the quad view
B ACCESS DOOR LOCK—allows key access to the
hard drive slot
D1 RHD SLOT—accepts a removable hard drive (RHD)
that stores recorded audio/video files
D2 DATA/POWER LEDs—yellow LED (on the left) lights
when data is being written to the removable hard
drive; green LED (on the right) lights when the
removable hard drive is powered on.
D3
EJECT BUTTON—ejects the removable hard drive
E
RECORD BUTTON—starts manual recording
F STOP BUTTON—stops playback video and resumes
the live view
CAUTION: To prevent corruption of the hard drive, press
the STOP button BEFORE removing the hard drive.
G PAUSE BUTTON—pauses playback video (or
resumes paused video playback)
H
POWER BUTTON—has the following functions:
 When pressed and released, manually powers the
MDVR ON or OFF
NOTE: In typical installations, the MDVR is powered
ON and OFF automatically by the vehicle-ignition
sensor. When it has been powered ON manually, the
MDVR remains ON until the POWER button is pressed
again.
When the MDVR is already ON because it has been
triggered by a sensor and recording, the POWER button
is disabled.
I SEARCH/MENU BUTTON—when pressed and
released, initiates display of the Search menu for
audio/video files stored on the hard drive; when
pressed and held for 3 seconds, initiates display of
the Main menu
J AUDIO/VIDEO INPUT—accepts the
SV-4CTHRNS
wiring harness
K TRIGGER INPUT—accepts the
SV-4CSENHRNS
wiring harness
L ETHERNET PORT—accepts the RJ45 connector of
an optional Ethernet cable; can be used to download
files through a wired or wireless Ethernet connection
M GPS RECEPTACLE— (optional) accepts the
connector for the GPS module
N
FAN—cools the MDVR by maintaining air flow