Installation guide

RouteRecorder® 4C Installation Guide July 2009
ROUTERECORDER 4C IG Ver 1.3.docx 17
Communication (Comm.) Setup Menu
The Communication (Comm.) Setup menu allows user configuration of Comm. 1 and Comm. 2 as follows:
Menu Item Description Comments
Baud Rate Selects the baud transfer rate
Values: 4800, 9600, 38400
Default: 9600
Parity Selects none, even, or odd
parity
Values: none, even, odd
Default: none
Data Bits Selects number of data bits
Values: 5, 6, 7, 8, 9
Default: 8
Stop Bits Selects number of stop bits
Values: 1, 2
Default: 1
Protocol Selects the protocol to be used
with zoom cameras; Note that
Safety Vision supplies a Sony
forward-facing camera
Values: NONE, VISCA (Sony), COSTAR
Default: COSTAR
One Touch Zoom* Selects the percentage of
zoom applied
Values:
Default: 100 PCT
Focus** Selects infinite or automatic
focus
Values: AUTO, INFINITY
Default: AUTO
Sensitivity** Selects how sensitive the
camera is to light
Values: HIGH, LOW
Default: LOW
Slow Shutter** Turns the slow shutter feature
on or off
Values: ON, OFF
Default: OFF
* This option only appears when VISCA or COSTAR is selected as the Protocol.
** These options only appear when VISCA is selected as the Protocol.