Installation guide

RouteRecorder® 4C Installation Guide July 2009
ROUTERECORDER 4C IG Ver 1.3.docx 16
 Speed/Accel. Setup Sub-Menu
Menu Item Description Comments
Speed GPS-detected speed at which
recording begins
Values: ENABLE, DISABLE
Default: 52 MPH
Speed Dwell
Time for which recording lasts
once Speed (as set in the
previous item) has been
surpassed
Values: 0 MIN to 60 MIN
Default: 5 MIN
Accel. X
Amount of G (gravitational
force) detected by the
accelerometer on the X axis
(side-to-side)
Values: 1.0 to 10.9 G
Default: 1.0 G
(see Note)
Accel. Y
Amount of G (gravitational
force) detected by the
accelerometer on the Y axis
(backwards and forwards)
Values: 1.0 to 10.9 G
Default: 1.0 G
(see Note)
Accel. Dwell
Time for which recording lasts
once Accel. X or Y (as set in
the previous items) has been
surpassed
Values: 0 MIN to 60 MIN
Default: 5 MIN
NOTE: The accelerometer values are absolute. A setting of 5.0 G will trigger an event when both 5.0 G and -5.0 G is reached.