Installation guide

RouteRecorder® 4C Installation Guide July 2009
ROUTERECORDER 4C IG Ver 1.3.docx 13
Menu Item Description Comments
Password Setup
Allows user to set a password
that is required when
performing certain activities
with the MDVR; password
allows use of designated
activity for 30 minutes or until
power is cycled
The MDVR prompts for password input when it is powered up
initially. The default password is 123456. The password may
contain any upper- or lowercase letters in addition to numbers
and the symbols “-“ and “@”.
The requirement for a password can be enabled or disabled
for 4 levels of operation as follows:
 All Keys
 Power-off
 Playback
 Menus
Advanced Setup
Initiates display of the
Advanced Setup menu
Menu items:
 Restore Defaults (restores factory default settings)
 Disk to Erase (selects target for Erase Media and Format
Media options)
 Erase Media (Permanently deletes all recorded data except
for the system directory
 Format Media (Permanently deletes all recorded data and
installs a DVR file system – use when “No Disk” error
appears despite installed disk)
 Network Setup (See following “Network Setup Sub-Menu”
section.)
 Network Setup Sub-Menu
Menu Item Description Comments
IP Address: MDVR network address
(requires power cycle to take
effect)
User-selectable
Subnet Mask: Used to determine the subnet
to which MDVR IP address
belongs (requires power cycle
to take effect)
User-selectable
FTP Username Case-sensitive user name
used when connecting with a
web browser
Default: USER
FTP Password
Case-sensitive password used
when connecting with a web
browser
Default: PASS
Save Saves network setup
information
N/A