Installation guide

RouteRecorder® 4C Installation Guide July 2009
ROUTERECORDER 4C IG Ver 1.3.docx 12
 Appendix B: Setup Menus
The main menu includes the following menus:
 System Setup
 Title Setup
 Trigger Setup
 Communication (Comm.) Setup
 Camera 1-4 Setup
 GPS Setup
 System Info
System Setup Menu
The System Setup menu allows user configuration as follows:
Menu Item Description Comments
OSD
Turns the On Screen Display
on or off
Values: ENABLE, DISABLE
Default: ENABLE
Record Mode
Selects continuous recording
or trigger-based recording
(Stop)
V
alues: CONTINUOUS, STOP
Default: STOP
Units
Controls the standard of
measurement
V
alues: ENGLISH, METRIC
Default: ENGLISH
GP Out 1, 2 Mode
General purpose 12V outputs
indicate a number of MDVR
events (see Comments)
V
alues:
 POWER (unit powered on)
 RECORD (recording)
 PLAY (playing back footage)
 SPEED (speed exceeds limit set in GPS Setup Menu)
 ACCEL (acceleration exceeds limit set in GPS Setup Menu)
 T1-T7 (when HIGH state voltage is applied to indicated
triggers)
 USER_CONTROL (trigger command made using telnet
protocol)
 DISK_FULL (disk full, recording stopped)
 TRIGGER_ACTIVE (any trigger is activates)
Default for GP Out 1 Mode: RECORD
Default for GP Out Mode: POWER
Time Setup
Displays the menu that
controls the system date, time,
timezone, Daylight Saving
Time, and 12 or 24 hour
formats
Default value for Daylight Saving Time is ON
File Setup
Displays the File Setup Menu
that allows the user to define
the maximum recorded file size
by time and file size.
Menu items:
 Max File Time (10 minute default)
 Max File Size (1024 MB default)