User`s manual

UCIT Series User’s Manual
8
2.1. Front Panel Definitions
2.1.1. LED Indicator
 [PWR]Power Indicator
 Solid: Unit is powered on
 [ALM]Alarm indicator.
 Flashing: Unit is recording an active alarm
 [REC]Recording indicator:
 Flashing: Unit is recording
 [HD]Hard drive indicator:
 Solid: HDD has been successfully detected and loaded
 Not Illuminated: HDD has not been detected or has failed
 Flashing: HDD is recording
 [SD]SD card indicator:
 Solid: SD card has been successfully detected and loaded
 Not Illuminated: SD card has not been detected or has failed
 Flashing: SD card is recording
 [GPS]GPS signal indicator.
 Solid: GPS lock has been obtained
 [ERR]Error indicator.
 If illuminated, contact Safety Track Support
 [V-Loss]Video loss indicator:
 Flashing: One or more cameras are not detected
 [HTR]Heating indicator.
 Flashing: Optional HDD heater is running
 [NET]Network indicator.
 Solid: Network is connected to back-end server
2.1.2. Other Definitions
 [IR]IR receiver for remote controller.
 [LOCK]Hard drive security lock. Note: The device can only be powered on once HDD
sled is locked into position. If unit is not locked, the unit will shut off on power-up.
 [MIC]MIC input.
 [EAR]External Speaker output.