User`s manual

UCIT Series User’s Manual

 GPS Overspeed

Threshold: 60km/h by default, adjustable within the range of 0~999. Press DEL to

delete the original number and use numbers to enter new setting. Note: Only KM/H is

supported at this time. For MPH, use calculator to translate to KM/H.

Enable: On/Off, press [ENTER] to input;

 On: When the speed of the GPS exceeds the threshold value, the alarm recording

will be started and alarm logs will be recorded;

 Off: When the speed of the GPS exceeds the threshold value, neither the alarm

recording nor the alarm logs will be started

Upon completion, press the Save button to save settings.

 Acceleration/Impacts/Hard Braking

 Move the cursor to “G-Sensor”, press [ENTER] to enter the following menu of G-Sensor

settings:

GPS OVER SPEED

THRESHOLD：60（0~999）（km/h）

ENABLE

：

ON/OFF

SAVE

SENSOR

THRESHOLD VALUES

X: 2.00 g

Y: 2.00 g

Z: 2.00 g

ALARM SWITCH: ON/OFF

STATUS: X= -0.12 Y= -0.03 Z= -0.01

SAVEADJUST