Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 Safety Track UCIT 4 Channel DVR Installation and Configuration Manual Version 1.0.
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 Table of Contents Product Features………………………………………………………………………………………………………………………………3 Specifications………………………………………………………………………………………………………………………………….. 4 Product Diagram………………………………………………………………………………………………………………………………5 Front Panel………………………………………………………………………………………………………………………………….
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 Product Features • • • • • • • • • 4 Channel mobile DVR system with Live Streaming Video, Audio, and GPS Tracking. Indoor and Outdoor cameras to give true 360° viewing coverage. Video output for external monitor/In-Dash stereo connectivity. Industry leading compression format – allowing video to stream over 3G signals. Automatic and Scheduled Recordings Four separate 12v inputs to switch the video view (example backup monitor).
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 Specifications Item Video Format Video Input Audio Input Video Output Audio Output Alarm Input Alarm Output Display Mode Display Resolution D1 Recording Resolution CIF Recording Frame Compression Format Operation System Triplex Recording Mode Schedule Recording LED Indicator Event Mode Playback Mode Network GPS Storage Type Backup Device Firmware Update Multi-Language G Sensor Operation Power Supply Dimension Weight Operation Temperature Desc
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 Product Diagram Front Panel IR Extension Compact Flash 1 Compact Flash 2 GPS Indicator IR Receiver Recording Indicator Power Indicator Rear Panel Video Out BNC Video In USB Audio Out GPS Antenna Aux Power In 12-28v ‘Alarm’ Input 4-pin Video In 5 Power Harness
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 Wiring Diagrams 12-28v Alarm Input (Alarm functionality outlined on page 14) 1. 2. 3. 4. 5. Alarm Input 1 Alarm Input 2 Alarm Input 3 Alarm Input 4 Chassis Ground Audio Input/Output 1. 2. 3. 4.
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 4-Pin Video Cable Harness 1. 2. 3. 4. Channel 1 (Black) Channel 2 (Red) Channel 3 (Yellow) Channel 4 (White) Power Harness 1. 2. 3. 4. 5. 6. Switch Power (ACC) Signal Ground Chassis Ground Constant Power 12v Output Signal Ground *Note: When connecting wiring harness, the Chassis Ground should be an isolated connection to a true Chassis Ground not tapped into an existing ground circuit.
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 Unit Installation Mounting DVR Mount the DVR unit inside the vehicle, with the below considerations: • • • • Unit should be mounted in an area that has no exposure to potential moisture When mounting unit, choose a location that will deter operator tampering but facilitate access to the CF cards should they need to be removed for manual review.
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 System Configuration Unit Remote Overview Channel 2 Channel 1 Record Start/Stop Channel 3 Quad View Channel 4 Menu Mute Direction Right Enter Fast Forward Rewind Stop Play Pause Menu Screen Overview The below images are the menu options of the DVR which will be outlined in the following sections.
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 Encoding Settings The Encoding settings determine the video quality and compression for live streaming. These settings will be set by Safety Track prior to shipment, and should not be modified at any time. Modifying these settings can alter the compression of the video which can cause undesired live viewing results, increased data charges, and decreased storage intervals.
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 Plate Number The Plate Number setting is not used on the DVR, it is set on the back end by Safety Track. This setting is to give the DVR a unique identifier (e.g. Truck 38) for easy identification. Compact Flash Card Format The Format option should only be used under the direction of Support Professionals from Safety Track. Executing this option will erase ALL video files currently on the CF card and cannot be recovered once erased.
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 Power Management The Power Management setting is used to set the time the DVR will continue to record after the vehicle has been shut off. By default, Safety Track sets this time to 15 minutes. The maximum time the DVR will record after the vehicle is shut off is 120 minutes. Firmware Version The Firmware Version option shows the current version of the DVR’s firmware.
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 DVR Serial Number The DVR Serial Number option shows the SN of the device. This number is how the DVR identifies itself with the streaming servers at Safety Track. This option will only be used during device troubleshooting with Support Professionals at Safety Track. 3G Network Settings The 3G Network Settings tell the DVR how to communicate with the streaming servers at Safety Track.
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 12-28v ‘Alarm’ Input The Alarm Input setting is for DVRs that have an external monitor. This option is to tell the OSD to train to one camera when a voltage input is received. This option can be used for backup cameras, blind spot cameras when turn signals are used, to watch a tow truck hook a vehicle when the PTO is engaged, etc. Example – Backup Camera: The Channel 2 camera is affixed to the license plate.
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 On Screen Display (OSD) Camera Views By default, the OSD will display the default setting that was defined in the OSD Settings in the DVR menu. To change the OSD to fix on a particular camera, press the corresponding channel key on the DVR remote or press the quad key to view all four cameras simultaneously. Status Indicators The OSD will display three status indicators in the top right corner of the screen.
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 Playback Mode For DVRs with an external monitor, the video files stored on the CF card can be viewed directly from the device. Accessing Playback Mode To access the playback mode of the DVR, press the play button on the DVR remote. Reviewing Video Files Select the video file to review from the playback menu using the date and time closest to the timeframe you wish to view.
Safety Track 249 Main Street Belleville, MI 48111 888-286-9829 Support Safety Track would like to thank you again for your purchase of our UCIT Mobile DVR. We are confident our device will provide you streaming video for years to come with the proper care. Should you have any technical issues or questions, please feel free to reach out to us in the following ways: Website Visit www.safetytrack.net/support for support topics, FAQs and other support related items.
