Specifications

HYDRAULIC HOOKUP
Connect hydraulic pressure lines from the hydraulic
power supply (Wet kit) to the pressure and return lines as
illustrated on figure 1. The pressure relief on the wet kit
pump must be adjusted to have 3500 PSI to the system
under load. A gauge has been provided (Serial
#0891231 & later) to provide an easy reference for pres-
sure. Do not exceed 3500 PSI as motor failure could re-
sult.
AIR BRAKE HOOKUP
Connect the control line (blue) from your truck air supply to
the blue gladhand on the trailer. Connect the tank supply
line (red) to the red gladhand on the trailer. See figure 1.
WARNING: IF THE ABS INDICATOR LAMP CO-
MES ON AND STAYS ON WHEN YOU APPLY
BRAKES TO A MOVING TRAILER, THE TRAILER
ABS IS NOT WORKING PROPERLY. THE ABS MUST
BE SERVICED AS SOON AS POSSIBLE UPON COM-
PLETION OF YOUR TRIP TO ENSURE FULL
ANIT-LOCK BRAKING CAPABILITY
START UP AND STOPPING
Operation of the forage box with truck begins when the
PTO is engaged to run the hydraulic pump.
Operation for tractor pulled forage boxes begins when
the tractor hydraulic system is engaged.
--9-- 9100 Rear Unload
FIGURE 1. ELECTRICAL LIGHT AND AIR BRAKE HOOKUP
ABS INDICATOR
LAMP
BLUE GLADHAND
RED GLADHAND
7 PIN ELECTRICAL SOCKET
HYDRAULIC RETURN LINE
HYDRAULIC
PRESSURE
LINE
PRESSURE GAUGE