Owner`s manual

9100 Rear Unload - 2 -
INTRODUCTION
Congratulations on your purchase of a new Meyer
Rear Unload Forage Box. Undoubtedly you have
given much consideration to your purchase and we’re
proud that you have selected Meyer. Pride in
craftsmanship, engineering and customer service
have made Meyer products the finest in the farm
equipment industry today.
There is no substitute for quality. That is why
thousands of people like you have purchased Meyer
farm equipment. They felt it was the best equipment to
serve their farming needs, now and in years to come.
We ask that you follow our policy of “safety first,” and
we strongly suggest that you read through the owner’s
manual before operating your Meyer farm equipment.
Meyer Manufacturing Corporation wants to thank you
for not compromising quality. We are determined to
offer excellence in customer service as well as
provide you with the very best value for your dollar.
Sincerely,
All Employees of
MEYER MANUFACTURING CORPORATION
The Model 9100 is available as a truck/trailer mounted
unit or mounted to a wagon running gear pulled and
powered by a farm tractor. When the PTO is referred
to, it means power takeoff from the truck.
The Model 9100 may be referred to as rear unload
box, forage box, box or rear unload forage box in this
manual.
This SAFETY ALERT SYMBOL means
ATTENTION! BE CAREFUL! YOUR SAFETY IS
INVOLVED! It stresses an attitude of HEADS UP FOR
SAFETY. When you see this symbol, be alert to the
possibility of PERSONAL INJURY and carefully read
the message that follows.
WARNING: NEVER OPERATE WITHOUT
ALL COVERS, SHIELDS AND GUARDS IN PLACE.
KEEP HANDS, FEET AND CLOTHING AWAY
FROM MOVING PARTS. SOME COVERS AND
GUARDS HAVE BEEN REMOVED FOR
ILLUSTRATIVE PURPOSES ONLY IN THIS
MANUAL. FAILURE TO HEED MAY RESULT IN
SERIOUS PERSONAL INJURY OR DEATH.
Meyer Manufacturing Corporation reserves the right to
make improvements in design, or changes in
specifications at any time, without incurring any
obligation to owners of units previously sold.
This supersedes all previous published instructions.
IMPORTANT:
At the front of this manual is a Product Registration
and Inspection Certificate. Be sure your dealer has
completed this certificate and promptly forwarded a
copy to Meyer Manufacturing to validate the
manufacturer’s warranty. The product model and
serial number are recorded on this certificate and
below for proper identification of your Meyer Forage
Box by your dealer and the manufacturer when
ordering repair parts. The serial number plate is found
near the control levers on your forage box and
stamped in the front corner of the left hand end frame.
At the back of this manual is the repair parts section.
All replacement parts are to be obtained from or
ordered through your Meyer dealership. When
ordering repair parts, refer to the parts section and
give complete information including quantity, correct
part number, detailed description and even Model No.
and Serial No. of the forage box which needs repair
parts.
HOW TO READ YOUR SERIAL NUMBER
Your serial number is stamped on the front left hand
vertical tube.
Example: 1291253
NOTE: All references to right hand (RH), left hand
(LH), front and rear apply to the product as viewed
from the rear of the box.
You are urged to study this manual and follow the
instructions carefully. Your efforts will be repaid in
better operation and service as well as a savings in
time and repair expense. Failure to read this manual
and understand the machine could lead to serious
injury. If you do not understand instructions in this
manual, contact either your dealer or Meyer
Manufacturing Corp. at Dorchester, WI 54425.
Model No.
Serial No.
Date of Purchase
Model Year / Model / Sequence of Build
12
91
253