Owner`s manual

9100 Rear Unload - 18 -

ADJUSTMENTS

WARNING: SHUT OFF AND LOCK OUT POWER BEFORE CLEANING, ADJUSTING, LUBRICATING

OR SERVICING THIS MACHINE. FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR

DEATH.

Correct tension on the apron chains is when the apron chain slat is 1/8” to 1/4” off the return slides (three

feet from the front of the box). To tighten chains, tighten the adjuster bolts at each end of the front sprocket shafts.

Each apron chain has its own sprocket shaft. Tighten the adjuster bolts at each end of the shaft equally. If adjuster

bolt reaches maximum travel, remove equal links from each strand. Removable links are provided in chain.

The roller chain drives are tensioned by automatic spring loaded tension blocks. Periodically tighteners will need to

be adjusted to maintain proper spring tension. Springs should be compressed to obtain approximately 5” overall

length.

ADJUSTMENT DIAGRAM