Owner`s manual

9100 Rear Unload - 16 -

LUBRICATION

WARNING: SHUT OFF AND LOCK OUT

POWER BEFORE CLEANING, ADJUSTING,

LUBRICATING OR SERVICING THIS MACHINE.

FAILURE TO HEED MAY RESULT IN SERIOUS

PERSONAL INJURY OR DEATH.

DAILY LUBRICATION

(every 8-10 loads)

Oil (3) roller chains on apron drive. This is

done by opening the ball valve on the gravity oiler

while unloading, once per day.

WARNING: DO NOT STAND BEHIND UNIT

WHILE PERFORMING THIS OPERATION.

Refill the gravity oiler at the beginning of each

day.

Grease three jackshaft bearings on the rear

driveshaft (each end, one @ center).

Oil (4) rear gate latch pivot bolts.

Grease (3) main apron shaft bearings.

END OF CROP CLEANUP AND MAINTENANCE

Allow box to completely clean out last load of forage.

Clean out all forage material from inside the box and

on the outside of the box.

It is recommended to lube the forage box before

storage to exclude moisture from bearings. Apply oil

to roller chain drives with the gravity oil luber and to

the main apron chains with a brush.

It is also a good time to inspect all adjustments and

check for parts that need repair or replacement.

Performing these tasks now will guarantee that the

forage box is ready for use at the beginning of the

next season.