Instructions / Assembly

877.655.3443 www.eagleindustrialgroup.com Page 13
Two Ceiling Brackets
Used With Adjoined
Racks
Multiple Racks:
• If installing multiple racks, end-to-end or side-by-side, a 27” ceiling bracket
should be utilized per corner, per rack.
• At the corners where 2 vertical posts will be hanging side by side, install the
ceiling brackets back to back and utilize 2 lag bolts per bracket as outlined
on page 6 (Figures 6, 28 & 29). Depending on the direction of the ceiling
joist in relation to the racks, the vertical posts will either be located on
opposite sides of the ceiling brackets (Figure 29), or they will be located on
the same side of the ceiling brackets (Figure 28). In either orientation, run
the hex bolts through both ceiling brackets.
Two Ceiling Brackets
Used With Adjoined
Racks
FIG 28
FIG 29