User's Manual

Response to a Ligature Alarm
1. Check alarm display / over door lights to identify which Door Alarm is alarming
2. Go to room and evaluate the situation (Fully open the door to stop alarm
re-triggering).
3. Cancel alarm using staff attack alarm system interface
Door Alarm Testing
Regular testing of the Full-door Ligature Alarm is essential to ensure that the system
continues to work as intended throughout its service life.
Test tools
Ligature Test Tool - SHC96-203
The Ligature Test Tool is used to apply ligature loads to the door during testing.
Magnet Test Tool - SHC96-217
The Magnet Test Tool is used to enable Test mode and to mute the door buzzer.
STG028 REV:1 (20200731) 4