User's Manual
2
Sensing Strap
Transmitter Housing
Cover Plate
User
Interface
PRODUCT DIAGRAM - DOOR ALARM
PRODUCT DIAGRAM - DOOR ALARM RECEIVER
The Door Alarm has two main components, the
Transmitter and the Sensing Strap, connected
by a cable running within the bottom of the
door leaf. The PCB within the Transmitter
communicates wireless to the Receivers.
The Door Alarm will be pre-installed into a SHP
doorset. The doorset must be installed and
maintained by accredited SHP installers and the
performance of the Door Alarm must be signed
off by the ward manager (or person of similar
seniority) during nal commissioning.
The Door Alarm Receiver wirelessly
communicates to the Door Alarms, providing a
connection point for signal output to the staff
alarm.
Door Alarm Receivers should be installed in
non-patient areas, typically roof spaces or riser
cupboards.
Safehinge Primera Service Level Agreement (SLA)
SHP can provide a SLA program to aid in the maintenance of the Door Alarm. The SLA maintenance programme is
highly recommended as an additional service.
Please contact Safehinge Primera for details: info@safehingeprimera.com or 0330 058 0988.