HUGO User Manual

HUGO-X1 User Manual
www.safeguardpowersolutions.com 855.484.6797 P a g e | 7
5. Hang the UPS on a flat surface that will adequately support the weight of the UPS (45
lbs). When replacing hanger screws, please consult with professionals to use the
proper mounting screws or bolts. Mounting screws are not provided with the package
due to various installation locations. If the unit is to be wall mounted, it is strongly
recommended by the manufacturer to mount on studs only due to the heavy weight of
the unit (45 lbs). Should mounting on stub is not an option, please consult with a
professional to mount the unit properly using the correct anchors and screws. SPS is
not liable for any installation errors such as improper use of mounting material and/or
mounting methods.
6. Using a Phillips head screwdriver, remove the wiring cover at right side of the UPS,
connect application to "utility output socket", Flow Sensor to "Flow signal interface" (if
applicable), as shown below: