HUGO User Manual

HUGO-X1 User Manual
www.safeguardpowersolutions.com 855.484.6797 P a g e | 6
b) LED DISPLAY:
c) INSTALLATION:
Ensure that the ON/OFF switch is in the “OFF” position during installation. The UPS
can store a significant amount of power for an extended period. DC voltage may be
present at the DC output terminals even when the input terminals are
disconnected from power.
1. After unpacking the UPS, check whether there is any mechanical damage due to
transportation. If the UPS has been noticeably damaged, contact your sales
representative for assistance.
2. Tools Required
3. Remove the (4) hangers and (8) screws. Tighten each hanger with (2) screws.
4. Choose and prepare proper installation location. Note: Center point distance between
left and right hangers is 15.5 inches.
Warning! Ensure UPS is located above flood and snow lines. If at any time the UPS
becomes damaged due to water or other, please consult with SPS customer care.