HUGO Hardwiring Instructions

d) Make sure not to tangle the wires inside the HUGO unit for easier maintenance and service calls
in the future.
e) Connect your appliance’s wire cords G (green), N (white), and L (red or black) to the
corresponding positions on HUGO’s “AC Output” of the green plug.
 G to PE
 N to N
 L to L
f) Ensure no bare wires are exposed to the outside.
g) Tighten the flat head screws on the green connector.
h) Pull the newly installed wires to ensure a tight connection.
i) Plug the green connector back to the inverter.