User`s guide

AIRSHIP © 2009
Page 79
General
The Alarms system has three Alarm triggers. Each trigger has settings for different Actions
to take when the Alarm is triggered. See the Sensors section for Sensor Alarm functions.
Alarm Triggers
Motion Detection: Motion Detected in the video signal will trigger an Alarm for this
channel. See the Motion Area tab for configuration details.
Video Signal Loss: A loss of video signal will trigger an Alarm for this channel.
Video Source Tampering: If the Camera appears to have been tampered with, such
as spray paint over the lens, this Alarm will trigger.
Alarm Settings and Actions
Enable: When checked, this Alarm Trigger is enabled for this Camera.
Enable Audible Alarm: When checked, an audible alarm as defined in the System |
General setup will sound through the Server's attached speakers.
Full Screen: When checked, this Camera will automatically pop to Full Screen mode
on the Server when the Alarm is triggered.