User`s guide

AIRSHIP © 2009
Page 76
PTZ
The PTZ (Pan / Tilt / Zoom) configuration tab allows you to enter the configuration
details for any PTZ cameras connected to the Server. Be sure to reference your PTZ
camera manufacturer's documentation for the correct settings to enter here.
NOTE: Other PTZ camera types and protocols can also be supported - please talk with
your system integrator or email us at [e-mail] to find out more.
The Server supports the following PTZ camera protocols:
KTD-312
NiceCam
Pelco D
Pelco P
Lilin PIH
Philips TC8560/700
Samsung
Yaan Speed Dome
TD-500
PTZ Protocol: Select the correct protocol for use by this camera.
COM Port: Select the COM port that the PTZ control is connected to.
Baud Rate: Select the correct baud rate.
Address: Select the correct RS-485 address for the Camera.