User`s guide

AIRSHIP © 2009
Page 44
Cameras, Sensor, and Matrix
The Cameras, Sensor, and Matrix panel has control of different features of each camera,
sensor, or matrix out.
Cameras
Live View
Click on the camera icon to turn the different incoming camera live views on and off. The
icon is in gray when the live view is off and changes to orange when the live view is on.
Right-click and choose Start All to turn them all on or Stop All to turn them all off.
Record
Click on the record icon to activate or deactivate recording for the corresponding camera.
The icon is in gray when the camera is not in recording and changes to red when in
recording. Right-click and choose Start All to turn them all on or Stop All to turn them all
off.
NOTE: This is the manual Recording control. If Schedule is activated, you cannot activate or
deactivate recording. You will see a message if you attempt to do so.
Alarm
Click on the alarm icon to activate or deactivate Alarm detection for the corresponding
channel. The icon is in gray when alarm is deactivated, changes to orange when activated,
and turns to red when alarm is trigged. Right-click and choose Start All Alarm to turn them
all on or Stop All Alarm to turn them all off.
NOTE: This is the manual Alarm control. If Schedule is activated, you cannot activate or
deactivate alarms. You will see a message if you attempt to do so.
Sensor
Click on the alarm icon to activate or deactivate Sensor detection for the corresponding
sensor. The icon is in gray when sensor alarm is deactivated, changes to orange when
activated, and turns to red when sensor is trigged. Right-click and choose Arm All to turn
them all on or Disarm All to turn them all off.
NOTE: This is the manual Sensor control. If Schedule is activated, you cannot activate or
deactivate alarms. You will see a message if you attempt to do so.
Matrix
Click on the camera icon to turn the different matrix output on and off. The icon is in gray
when the matrix output is turned off and changes to orange when it is on.
Note: This function is only available on Airship Servers that have Analog Monitor Outputs