User`s guide

AIRSHIP © 2009
Page 160
Main Screen
The Server and Client use a common Playback interface.
Note: See Web Playback for details about the Web Client Playback features.
The Main Screen controls are comprised of several commonly used features for which quick
action is often needed. Hover the mouse over a button to see its label.
Dual Monitor Configuration
If your Airship Workstation or other PC has two VGA monitors, then the Airship Client
Playback should open on the 2nd monitor. If it does not, make sure your Windows Display
Settings have the 2nd screen activated and that Monitor 1 is the primary display. It may
also be necessary to configure the screen layout side-by-side, when monitor 1 on the left
and monitor 2 directly to the right. After making any changes, exit the Airship Client, reboot
the workstation, and try it again. Contact your support representative for further assistance.
Screen Display: Select the number of playback windows you want to use. Your
administrator may have limited the number of screens you can use for Playback,
according to the abilities of the system hardware.
Snapshot: Takes a Snapshot of the currently selected playback screen.
Instant Replay: Immediately plays the last few moments on the currently selected
Camera. See Set Instant Replay Time to configure how far back to go.
Digital Zoom: Activate x3 Digital Zoom Mode for the currently selected playback screen.
Disc Burn: Opens the Media burner along with any CD burn list assembled from Video
Clips or Snapshots.
Tools: See the Tools section for details on the options found here
Mute and Volume: Click Mute or slide the volume control to adjust volume on recordings
that include sound.
Motion Search: Activates Motion Search Mode for the currently selected playback screen.
Frame Mode: Activates Frame By Frame Mode for the currently selected playback
screen.