User`s guide

AIRSHIP © 2009
Page 154
Camera Adjust
The Camera Adjustment panel has controls for camera color settings, as well as PTZ
camera positioning and programming.
PTZ
The PTZ (Pan-Tilt-Zoom) Camera Control allows easy access to all PTZ Camera
functions. Please refer to the Server Setup | Cameras | PTZ to configure a PTZ Camera
for use.
Note: Not all PTZ cameras support all functions noted in this documentation, and in
some rare cases, the protocols supported will not completely match up to the protocols
supported by the PTZ device. Testing specific hardware for a given application is
warranted where PTZ functionality is required.
Zoom: The camera zooms in and out for tighter or wider view of the scene.
Focus: Adjusts the camera lens focus for the clearest image.
Iris: Opens and closes the camera iris, allowing more or less light into the lens.
Arrow Keys: Click and hold the mouse button on an individual arrow key to move the
camera to the corresponding direction and release the mouse to stop. Note that
some cameras do not support diagonal motion.
Click the PTZ Settings button and select additional PTZ features as follows.
Wiper: Activates or deactivates a PTZ lens wiper, if so equipped. (Some cameras
have other auxiliary controls which this will activate and deactivate.)
Light: Activates or deactivates a PTZ light, if so equipped. (Some cameras have
other auxiliary controls which this will activate and deactivate.)
Color
The color panel has the Brightness, Contrast, Saturation, and Hue controls for the
cameras. (Hover over the slider controls for the ToolTip to appear with the text label.)
 Select a camera and adjust the settings so that the image is most clear.
 Default sets all sliders to their default location for the selected channel.