User`s guide

AIRSHIP © 2009
Page 138
Matrix Output
If the Client system has a H.264 Decoder card(s) installed, you can use it to output selected
channels to an external analog monitor.
The Matrix Output setup allows you to select which Live Cameras to output on an analog
channel. You can also output another Matrix Configuration as a single screen. You can
configure each Matrix Output to display 1, 4, 13, or 16 channels in a matrix.
Matrix Size: Select how many cameras are to be displayed on the output channel; 1, 4,
12, or 16, using the buttons at the top.
Live Cameras: On the left of the window you will see the numbered list of Cameras.
Drag-n-Drop one of these Cameras to one of the black Display areas on the right. You
will see a label for that Camera in the Display area.
Video Format: Select NTSC or PAL to match the analog monitor that you are connecting
the output to.
Apply or OK: Your Matrix setup will take effect when you click OK or Apply.
When finished with this setup, simply connect each of the two Analog Output Video Decoder
/ Matrix card's BNC connectors to any standard BNC or RCA style input on a standard analog
monitor.
Note: IP cameras that may be connected to the Airship Server will not be available to
display through the analog outputs of the Matrix.