User`s guide

AIRSHIP © 2009
Page 12
- NOTE: Panasonic Models NW484, NF302, and NS954 and some others have a known
Panasonic firmware issue that causes a camera color change after resetting the IP camera.
To fix this, configure the device using its web setup. In "Camera Setup" => "Image" =>
"Image Adjust", Click "RESET" on the Red/Blue Gain, and the Aperture/Pedestal Level. Once
you've fixed this, the problem should not happen again until you reset the camera. A fix
may be available in later firmware versions.
- NOTE: Due to an undocumented change in operation, some cameras may not be able to
use our software to modify the on-screen camera name. The camera name in our software
will be able to change, but to change it on the OSD, you must use the cameras web setup.
Go to "Camera Setup" => "Cam Function". The only camera we've found with this change
so far is the NF302.
- NOTE: If, when using Panasonic's web software, you get a "Concurrent Access Limit"
screen, you can still view the camera by switching from "MPEG-4" to "JPEG" on the "Image
type" on the left.
- NOTE: Testing has been done on NW484, NF302, NP244, and NS954 models. Most other
models should work, although the NP1004 may have a few problems as it has a significantly
different feature set.
- (BETA) Added support for Sony IP cameras
- (BETA) Added support for ACTi IP cameras
- (BETA) Added support for Arecont IP cameras
- Weekly Review - Tool to search multiple cameras and display recording data from
searched cameras
- Added backplay ability to Exported clips.
- NOTE: Backplay will only be available to newly exported clips using 4.5 release. Old
exported clips will not have backplay functionality.
- Bookmark Mouseovers - Hovering over bookmarks in timeline now shows time and
description summary of bookmark.
- Client Setup Tool now forces decoder cards to live view automatically.
- Additional default alarm sound choices included.
Fixes
- Alarm Panel now exits after all alarms entries are deleted by user.
- Added additional device information into IP camera setup tool when retrieving camera
properties.
- IP Setup Tool now indicates when a retrieve was successful.
- Changed CD Burner form to now allow usage of application main form while CD burner
form is open.
- Fixed an issue where IP camera reconnect events were causing the application to pause.
- Fixed an issue where IP camera backplay was not smooth.
- Fixed an issue where the remote event log was causing an error in some cases.
- Fixed an issue where motion search was taking too long to return search results from
servers with a large number of recordings
- Fixed an issue where motion search was including old search results when executing a
new search
- Fixed an issue where motion search was displaying random images while searching.
- Fixed an issue where the send email form body text field did not have any scroll bars.
- Fixed an issue where an error would result when server starts with only IP cameras and
decoder cards.
- Fixed an issue in dual screen setup concerning playback states.
- Fixed an issue in IP Setup Tool to not allow device numbers to duplicate
- Fixed an issue in exported clips where backplay was not working in full screen.
- Fixed an issue where the server would not start correctly if xml bookmark path was not