User manual

Page 6 User manual P1 Audio Processor
Quick Start Guide
After reading the important safety information, you may wish to ‘plug
and go’. If, at any time, you are in doubt as to the correct operation
of the unit, all operational points are covered in detail later in this
manual, but as a quick start;
BASIC FUNCTIONS
The P1 is a mono audio path processor with separate stereo
monitoring facility, as shown below;
The three audio inputs have separate connectors but only one of
these inputs is connected to the main processing chain at any one
time. This is controlled by a simple priority system through the actual
plugging of the connectors.
 The balanced LINE input (3 pole ¼” jack plug) will always
have the highest priority.