User manual

Page 44 User manual P1 Audio Processor
The monitoring facilities
We’ve designed the P1 to provide the kind of monitoring set-up
which is most commonly required during track recording and
overdubbing.
If you have enough replay outputs from your recording device then
one stereo output of your recording device will normally be dedicated
to your main monitor loudspeakers and a second stereo output will
be available to feed to the P1’s monitor inputs.
If you have only a single stereo output from your recording device
then you can either work solely using headphone monitoring during
track laying, or use a split lead to feed both your monitor power amp
and the P1’s monitor inputs.
The P1 can accept either unbalanced or balanced monitor inputs.
If working from an unbalanced single stereo jack monitor output,
possibly a single 3.5mm stereo jack from a PC card, then connect as
shown below;