User manual

Page 24 User manual P1 Audio Processor
set this first according to their recommendation. If there is no
recommendation then we suggest you set it to its maximum setting.
Now adjust the output
gain on the P1 using a
flat blade screwdriver
until the desired
maximum recording
level is viewed on the
record meter. We
suggest you set a
maximum level of 1dB
below 0dBFS.
As this is a bit of a trial and error method, try a few different types of
source material ensure that the loudest parts are not pushing the
recording device into overload.
Once set correctly, there should be no need to further adjust either
the record device input gain or the P1’s output gain setting.