User manual

P1 Audio Processor User Manual Page 15
Balanced connection : plugs into the two jacks labelled ‘MONITOR INPUT LEFT (BAL)’ and ‘MONITOR INPUT RIGHT (BAL)’. Use two standard ‘off the shelf’ balanced line level cables, or if wiring your own, at the P1 end use standard ¼” 3-pole jack plugs, wiring for either left or right inputs is identical as follows;
Quasi balanced connection : plugs into
the two jacks labelled ‘MONITOR INPUT
LEFT (BAL)’ and ‘MONITOR INPUT
RIGHT (BAL)’. If feeding from an
unbalanced monitor output and wiring
your own cable, we suggest the following
wiring arrangement which will give better
noise and hum rejection. (Note that the
sleeves of the two 3-pole jacks at the P1
end are intentionally left unconnected.)