User manual

Page 14 User manual P1 Audio Processor
MONITOR INPUTS
The P1 has the option to accept either unbalanced or balanced
monitor inputs which allows standard cables to be used in both
cases. The monitor inputs will most commonly be fed from a stereo
output of the recording device or PC sound card.
Unbalanced connection : plugs into the jack labelled ‘MONITOR
INPUT L/R (UNBAL)’.
If you want to use a standard ‘off the shelf’ cable then use a standard
stereo twin ‘figure 8’ unbalanced cable with a single 3-pole jack plug
at either end. If wiring your own, at the P1 end use a standard ¼” 3-
pole jack plug wired as follows;