Instruction manual

6
HOW TO INSTALL
FOR
BABY
AND
CHILD
USE
IMPORTANT WARNING: THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT
PREVENTS THE RISK OF INCORRECT FITMENT OF THE ATTACHMENT CLIP TO THE
ANCHOR FITTING. ALWAYS ENSURE THAT THE ATTACHMENT CLIP IS CORRECTLY ENGAGED
TO THE ANCHOR FITTING AND NOT HOOKED OR FITTED TO ANY OTHER OBJECT BEFORE
EACH USE OF THE RESTRAINT. THIS IS ESPECIALLY IMPORTANT IN VEHICLES SUCH AS
STATION WAGONS, VANS, HATCH BACKS OR VEHICLES WITHOUT A FIXED PARCEL SHELF,
SINCE THE ANCHOR POINT IS USUALLY NOT VISIBLE.
The restraint strap & Attachment Clip may be damaged or disconnected by unsecured vehicle
contents. To ensure a secure engagement, before each use of the restraint follow this procedure:
Secure or remove any vehicle contents.
Tighten the Upper Anchorage Strap and ensure that strap is not twisted.
Make sure the Attachment Clip is correctly engaged.
The following diagram shows the correct the method of engaging Attachment Clip to Anchor Fitting.
A.
B.
C.
UPPER ANCHORAGE STRAP
CORRECT
Front of vehicle
Note: Fittings have been enlarged and straps have been
lengthened/shortened to improve clarity of the diagram.
CORRECT ENGAGEMENT OF
ATTACHMENT CLIP TO ANCHOR
FITTING WHEN THE ATTACHMENT
CLIP COVER IS USED.
VEHICLE INSTALLATION ACCESSORIES
(Available from retailers of Safe-n-Sound products)
EXTRA ANCHOR KITS: are available if using the restraint in additional vehicles.
Re-order numbers: 0038.
EXTENSION STRAPS: may be required for vehicles without a fixed parcel shelf.
Re-order numbers: 0035 (length 300 mm) 0036 (length 600 mm)
GATED 3-BAR SLIDE: for installation where the seat belt configuration does not
firmly hold the child restraint.
Re-order number: 0215.