Instruction manual

26
FOR
BABY
AND
CHILD
USE
ACCESSORIES
Strap
Connector
SHOULDER PADS (if fitted)
A.
B.
C.
BABY HEAD SUPPORT (if fitted)
POCKETS (if fitted)
MESSY MAT (IF SUPPLIED)
Shoulder Pads are designed to provide extra comfort for baby
or child and are easily fitted to the shoulder harness straps by:
At the rear of restraint pull down backing plate ( if fitted)
remove harness shoulder straps from metal strap connector
by slipping straps through open slot as shown right.
Pull the shoulder straps through slots & feed through
shoulder pads.
Refit the shoulder strap through the restraint slot & re-attach
to metal strap connector by following the instructions on
pages 21& 22 points D to G.
The pockets sewn on the trim are designed for your
convenience. They can hold those necessary items
that you need at a moments notice. e.g Bottle, face
washer, toy etc.
Caution: If using the pocket to store filled
bottles, please ensure contents are not
contaminated due to prolonged storage.
The messy mat has been specifically designed
to protect your vehicle seat from children’s
shoes rubbing against it. If the Messy Mat has
been supplied it must be used to protect the
car upholstery.
Place pocket on edge of seat, smooth back
toward seat join (’A’) and fit in any excess
messy mat into the join of the car seat (’A’).
Pull down backing plate (if fitted) feed the hook
and loop attachments on the Baby Head
support through the upper shoulder strap slots.
Engage the hook and loop attachments securely.
Return backing plate ensuring it clips back into
position.
CAUTION: The messy mat pocket is only for
small, light items. DO NOT overload the pocket
with heavy, bulky items as this may damage the
pocket or cause passengers to trip over them.
Body
Baby Head Support
Hook and Loop
attachments
Head Rest
Shoulder Strap
Slots
Shoulder Strap
Shoulder Pads
Padded Insert
Hood
Pocket
Long Messy Mat
(where supplied)
Short Messy Mat
(where supplied)
‘A’ ‘A’
Pocket
NOTE: Some messy mats may not have pockets.