Instruction manual

HOW TO CLEAN
FOR
BABY
AND
CHILD
USE
23
TO REPLACE COVER:
A.
B.
C.
D.
E.
Disengage Shoulder Harness Tongues from
Harness Buckle.
Feed the Harness Tongues & shoulder strap through
lap strap slots and matching shoulder strap slots in the
cover and Padded Insert (if fitted). Follow steps E to G
on page 22.
Stretch cover over the top of the restraint first at , then
the sides at as instructed above and then stretch the
cover around the rim of the restraint.
Re-fit the Seat Cover attachments.
Feed crotch 3-bar Slides through slots in cover and body using the reverse method of step D
on previous page.
IMPORTANT: When replacing cover, ensure none of the harness straps are twisted and that all
straps are secure by pulling each harness strap.
E.
F.
G.
I.
Remove harness shoulder straps from metal strap connector as instructed on page 21, item B.
Remove any accessories, if fitted as instructed on pages 25 and 26.
Unhook the cover at the top and bottom of the restraint. Peel cover from outer rim of the body
starting from on both sides and at , at the top.
Remove the cover while feeding Harness Tongues and strap through the lap strap slots in
the cover.
Re-engage Harness Buckle and Harness Tongues after removing cover to ensure safe
keeping of the Harness Buckle.
H.
Manual models: Do not remove Harness Adjustment
Strap from Harness Adjuster.
Harness Adjustment Strap
Access to the crotch 3-bar slides is restricted on this
model therefore use the tips of your fingers to manipulate
the 3-bar slides through the slots.
RETRACTOR HARNESS MODELS
Crotch 3-bar slide
Shoulder
Strap Slots