Instruction manual

HOW TO USE
ADJUSTING SHOULDER HARNESS STRAPS HEIGHT
Correct fitment of the harness is very important as it restrains the child in the restraint. The
harness must fit firmly around the upper torso of the child and be positioned so as to leave the
child's arms and legs free.
The shoulder straps must be in the slots which are nearest to the
child’s shoulders, but not more than 25mm below the child’s
shoulders. If the harness straps are more than 25 mm below the
level of the child's shoulders then the child is too large for the
restraint and the restraint
should not be used.
The shoulder straps must be
in the slots which are
nearest to the child’s
shoulders, but not more
than 25mm below the
child’s shoulders.
Front of vehicle
FOR
CHILD
USE
21
?
F
O
R
W
A
R
D
F
A
C
I
N
G
DISCONNECTING HARNESS STRAPS:
-STEPS IN CHANGING SHOULDER STRAP SLOTS
C.
A.
B.
D.
Remove the restraint from vehicle as instructed
on page 7.
At the rear of the restraint, pull down the backing
plate (if Fitted) and remove one of the harness
shoulder straps from metal Strap Connector by
slipping strap through open slot. The metal Strap
Connector is shown in diagram right.
Pull the shoulder strap through slot.
Insert shoulder strap through restraint
slot which will position shoulder strap
level with or above the child’s shoulder,
shown above. Ensure that the Shoulder
strap passes through matching slots in
cover and restraint body.
(Continued on next page).
FORWARD-FACING
Shoulder Harness
threaded UNDER Bar.
Harness
Shoulder Straps
Strap
Connector
25mm
1.
2.
3.
4.
5.
6.
7.
Upper shoulder strap slots.
Medium shoulder strap slots.
Lower shoulder strap slots.
Shoulder harness straps.
Harness tongues & buckle.
Lap strap slots.
Crotch strap slots.
The
Adjuster
straps
are
UNDER
the bar.
33
22
11
4444
55
66 66
77 77
RETRACTOR HARNESS MODELS