Instruction manual

FOR

CHILD

USE

HOW TO USE

PLACING CHILD IN THE RESTRAINT

- RETRACTOR HARNESS MODELS

B. Place child in the restraint and feed

each arm through shoulder straps.

Pull harness buckle up between

child’s legs.

A. Lengthen harness by pressing blue

harness adjustment button while

pulling on both shoulder straps

until the harness will accommodate

the child.

RETRACTOR HARNESS MODELS

TO REMOVE CHILD

C. Fit either harness tongue into the harness buckle followed by the other tongue until a

click is heard. Should the second tongue not insert - press the red button and

reinsert the tongues. Ensure secure engagement by pulling harness straps.

Press red button on harness buckle then both harness tongues will be released.

If using Head Rest, ensure it is correctly positioned by sliding it up or down to rest

above the shoulder strap slots being used for the harness straps.

D. Pull lap and crotch straps firmly. Pull shoulder harness

straps to remove slack from harness lap straps.

E. To remove slack from harness straps press harness

adjustment button while holding child against restraint

adjusting to a comfortable but firm fit. Check that the slack

in straps is minimal. Do not use restraint if straps do not

tighten and contact your local authorised service agent

for repair.

Click

Harness

Lap Strap

Crotch Straps

Shoulder

Strap

Pull to remove slack

from Harness Lap Strap

Front of vehicle

Blue Harness

Adjustment

Button (Under Flap)

Press

Press to

tighten