Instruction manual
13
?
FOR
BABY
USE
R
E
A
R
W
A
R
D
F
A
C
I
N
G
HOW TO USE
G. From behind the restraint, pull down backing plate (if
fitted) and pull shoulder harness straps through
shoulder slots to remove slack from harness, then
press the Blue Harness Adjustment Button, while
holding baby against restraint to adjust harness to a
comfortable but firm fit. Return backing plate
ensuring it clips back into position.
…or RETRACTOR HARNESS MODELS
Under 12kg
ADJUSTING SHOULDER HARNESS STRAPS HEIGHT
FOR BABY USE REARWARD-FACING
Correct fitment of the harness is very important as it
restrains the baby in the restraint. The harness must fit
firmly around upper torso of the baby and be positioned
so as to leave the baby's arms and legs free.
For baby up to 12 kg the shoulder straps must be in the
slots which are nearest to the child’s shoulders, but not
lower than the child’s shoulders. If your baby weighs
more than 12 kg then the restraint should be converted
for child use. (Refer to Forward Facing section.)
Make sure that nothing is obstructing harness straps and that baby’s arms and legs are free.
Minimise slack in straps as instructed in item F above. Do not use restraint if straps do not
tighten and contact your local authorised service agent for repair.
REMOVING BABY FROM RESTRAINT
B. Press the Blue Harness Adjustment Button while pulling both Shoulder Harness Strap
to slacken harness to the desired amount.
C. Press red button on Harness Buckle then both Harness Tongues will be released. Move each
shoulder strap to baby's side then pick up baby.
H. Tighten Adjustable Upper
Anchorage Strap by pulling
Adjustment Strap to remove
slack as shown right.
A.
B.
Press Upper Anchorage Strap Adjuster Button (A) while pulling Upper Anchorage Straps (B) to
slacken. Allow Upper Anchorage Straps (B) to fall to the sides for easy access into restraint.
Push Harness Strap Lock up under flap pulling each Shoulder Harness Strap to slacken
harness to the desired amount.
while
…or RETRACTOR HARNESS MODELS
Pull harness in the direction of
arrow to remove slack from
shoulder harness straps.
Pull Adjustment Strap
to remove slack
Storage
Strap
B
Fully press Adjuster Button (A)
while pulling Upper Anchorage
Strap (B) to lengthen.
A