User's Manual

Safe-
Com Wireless Public Safe
8-1-19 page 6
The SAFE-
1001 is a 2 stage fixed gain amplifier. A linear regulator supplies the power to the first
stage pre-
amplifier and the second stage is supplied with the external power input
+12 VDC. The circuit is designed to provide gain of ap
circuit can be tuned
to operate in the range from 150
the factory prior to shipping. The user can not change the tuning.
To operate the amplifier in a Class A, the amplifier i
operate as a Class A amplifier as shipped from the manufacturer. All the proper limitations of
operation, e.g. frequency limits. output power limits and spurious limits automatically controlled by
the equipment
when delivered inside a Safe
to provide three functions externally:
-
Output power control limits
-
Frequency passband filtering
-
Frequency of operation limits and
- Spurious noise control
These functions are provided when used with approved Safe
DC Input Range: 10 – 12VDC
DC Current: 2 amps maximum
RF input maximum:
+10dBm (50ohms)
RF output maximum: 5 watts
Dimensions: 56mm x 40mm
x 32mm
Copyright © 201
No part of this publication, or any software
form or by any means, including photocopying, electronic, mechanical, recording or otherwise, without the prior written permi
of the copyright holder.
Safe-Com
provides this document as is, without any warranty of any kind either expressed or implied including, but not limited to,
the implied warranties of merchantability and fitness of a particular purpose. Safe
Com Wireless Public Safe
ty Fiber Distributed Antenna System
1001 is a 2 stage fixed gain amplifier. A linear regulator supplies the power to the first
amplifier and the second stage is supplied with the external power input
+12 VDC. The circuit is designed to provide gain of ap
proximately 20 to 30 dB. This common
to operate in the range from 150
MHz to 869
MHz. The tuning is performed in
the factory prior to shipping. The user can not change the tuning.
To operate the amplifier in a Class A, the amplifier i
s configured by Safe-
Com Wireless to properly
operate as a Class A amplifier as shipped from the manufacturer. All the proper limitations of
operation, e.g. frequency limits. output power limits and spurious limits automatically controlled by
when delivered inside a Safe
-
Com Wireless Booster. Alternatively a user would need
to provide three functions externally:
Output power control limits
Frequency passband filtering
Frequency of operation limits and
These functions are provided when used with approved Safe
-com DAS systems.
+10dBm (50ohms)
x 32mm
Copyright © 201
9 Safe-Com. All Rights Reserved.
No part of this publication, or any software
included with it may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, including photocopying, electronic, mechanical, recording or otherwise, without the prior written permi
provides this document as is, without any warranty of any kind either expressed or implied including, but not limited to,
the implied warranties of merchantability and fitness of a particular purpose. Safe
-
Com may make changes or improvements in the
ty Fiber Distributed Antenna System
1001 is a 2 stage fixed gain amplifier. A linear regulator supplies the power to the first
amplifier and the second stage is supplied with the external power input
– typically +10 to
proximately 20 to 30 dB. This common
MHz. The tuning is performed in
Com Wireless to properly
operate as a Class A amplifier as shipped from the manufacturer. All the proper limitations of
operation, e.g. frequency limits. output power limits and spurious limits automatically controlled by
Com Wireless Booster. Alternatively a user would need
included with it may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, including photocopying, electronic, mechanical, recording or otherwise, without the prior written permi
ssion
provides this document as is, without any warranty of any kind either expressed or implied including, but not limited to,
Com may make changes or improvements in the