SAFE-COM Wireless Public Safety Distributed Antenna System Product Line Series SAFE-1001 Power Amplifier User Manual Safe-Com Wireless Holmdel, NJ 07733 www.safe-comwireless.
The information contained in this document is assumed to be correct and current. The manufacturer is not responsible for errors or omissions and reserves the right to change specifications at any time without notice. Safe-Com Wireless assumes no responsibility for its use nor for any indirect, incidental damage or loss resulting from its use. FCC Information This device is designed to be used with both Class A and Class B signal booster systems. WARNING. This is NOT a CONSUMER device.
Industrie Canada. Les numéros de certification des émetteurs avec lesquels cet amplificateur est autorisé à fonctionner sont IC: 22303-SAFE1, IC: 22303-SAFE2. Under Industry Canada regulations, this amplifier may only operate using an antenna of a type and maximum (or lesser) gain approved by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.
FCC Antenna Requirements The user must assure that the installation meets FCC RF exposure limits. Minimum distance between any person and the operating antenna must be 35 inches or 89 cm. The antenna must be mounted on a stable, permanent structure. Maximum ERP is 5 watts per FCC regulations per rule part 90.219(e)(1).
The Power amplifier module is factory tuned to the frequency bband of operation. The User can not modify the operating frequency band.
The SAFE-1001 1001 is a 2 stage fixed gain amplifier. A linear regulator supplies the power to the first stage pre-amplifier amplifier and the second stage is supplied with the external power input – typically +10 to +12 VDC. The circuit is designed to provide gain of ap approximately proximately 20 to 30 dB. This common circuit can be tuned to operate in the range from 150 MHz to 869 MHz. The tuning is performed in the factory prior to shipping. The user can not change the tuning.
equipment, software, or specifications described in this document at any time and without notice. These changes will be incorporated in new releases of this document. This document may contain technical inaccuracies or typographical errors. Safe-Com waives responsibility for any labor, materials, or costs incurred by any person or party as a result of using this document.
