Product Manual

ManualsBrandsSafco ManualsFile CartsGo Cart Mobile Cart

MODEL

NUMBER

5390

5390-37: 1 of 4; Rev. 3: 11/04

GoCart

Organizer

For questions or concerns, please call

Safco Consumer Hot Line 1-800-664-0042

available Monday-Friday 8:00 AM to 4:30 PM (Central Time)

(English-speaking operators)

ASSEMBLY INSTRUCTIONS

Safco Products Company, New Hope, MN 55428

TOOLS REQUIRED: Screwdriver, Hammer or Mallet

Back Panel 1 5390-07

Left Side Panel 1 5390-02

Right Side Panel 1 5390-03

Fixed Shelf 1 5390-05

Rail 2 5390-04

Base Panel 1 5390-01

LETTER

CODE

DESCRIPTION QTY. PART NO.

Vertical Divider 1 5390-06

Cam 20 5390-23

Short Screw Post 20 5390-21

Wood Dowel 20 5390-30

Caster 2 5390-25

LETTER

CODE

DESCRIPTION

QTY. PART NO.

PARTS LIST

Caster with Brake 2 5390-24

Small Screw 16 5390-27

Plastic Shelf 6 5390-09

Shelf Glide Push Pin 24 5390-26

Plastic Bin 4 5390-10

LETTER

CODE

DESCRIPTION

QTY. PART NO.

ASSEMBLED UNIT

PRODUCT WARRANTY REGISTRATION is available online at: www.safcoproducts.com

Summary of content (4 pages)

PAGE 1
GoCartTM Organizer MODEL NUMBER 5390 ASSEMBLY INSTRUCTIONS PRODUCT WARRANTY REGISTRATION is available online at: www.safcoproducts.com PARTS LIST LETTER CODE A B C D E F DESCRIPTION QTY. Back Panel Left Side Panel Right Side Panel Fixed Shelf Rail Base Panel PART NO. 1 1 1 1 2 1 LETTER CODE G H I J K 5390-07 5390-02 5390-03 5390-05 5390-04 5390-01 DESCRIPTION QTY. Vertical Divider Cam Short Screw Post Wood Dowel Caster 1 20 20 20 2 PART NO.
PAGE 2
1 Insert four more Cams into the large holes of the Vertical Divider. Screw the I Screw Posts into each small hole that has a plastic insert (do not over-tighten). Work on a smooth, clean surface. Locate the A Back Panel and position it with the large holes up. Lay the B Left Panel and the C Right Panel on the left and right sides of the Back Panels with the holes facing up as shown. Arrange the D Fixed Shelf and two E Rails above the Back Panel withthe holes up.
PAGE 3
4 Raise the G Vertical Divider upright with the group of small holes near the upper end. Raise the D Fixed Shelf and guide the posts and dowels into one end of the Vertical divider. Gently tap the Fixed Shelf to seat the dowels. Use a screwdriver to fasten the Cams by turning them clockwise until they stop. Raise the Base Panel with Casters and guide the posts and dowels into the other end of the Vertical divider. Gently tap the bottom of the Base Panel to seat the dowels.
PAGE 4
7 Raise the B Left Side Panel and guide the posts and dowels into the holes on the exposed edges. Gently tap the Side Panel to seat the dowels. Use a screwdriver to fasten the Cams by turning them clockwise until they stop. 8 Insert six O Shelf Glide Push Pins into the small holes on the insides of the Side Panels and each side of the Vertical divider.