Instructions / Assembly

Installation

Step 1

Install the mounting bracket(B) to the junction box with machine screw (A)

Step 2 Wire connection

Make wire connections, with wire connectors(C), following the reference chart listed below.

Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outlet Supply Wire to:

Black White

*Parallel Cord(round&smooth) *Parallel Cord(square&ridged)

Clear,Brown,Gold or Black without Tracer(colored stripes) Clear,Brwn,Gold or Black without Tracer(colored stripes)

Insulated Wire(not green)with copper metal conductor Insulated Wire(not green)with Silver metal conductor

*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and

ridged and the hot wire will be round in shape and smooth.(See illustration on left)

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around green ground screw on

mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is supplied with a ground

wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green

grounding screw on mounting bracket. Tighten ground screw.

Step 3

Attach the backplate(E) to the junction box and fix it by turning

the screwed ball (F) clockwise

Step 4

Put glass shade(H) and fixed loop(J)on socket(K), fasten the

socket ring(I) to fix it.

Step 5

Insert the bulbs (G) into the socket.

PLEASE USE TYPE"A" BULB MAX 40-WATT OR

CFL BULB MAX 13-WATT OR LED BULB MAX 9-

WATT

THERE ARE 2PCS LED 9-WATT BULB IN THE BOX

Step 6

Consult a qualified electrician to ensure correct branch circuit

conductor.

ENJOY YOUR LAMP

2/2