Instructions / Assembly

Installation

Step 1

Unpack all parts from cartons carefully.

Connect Tube Threaded(D) to Lamp Assembly(B)

Step 2

Using Wire nut(K) to connect wires

Step 3 Wire connection

*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and

ridged and the hot wire will be round in shape and smooth.(See illustration on left)

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around green

ground screw (F) on mounting bracket, no less than 2" from wire end. Tighten ground screw. If

fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire

around green grounding screw on mounting bracket. Tighten ground screw.

Step 4

Fix the Mounting Plate(J) to the junction box

with Mounting Screw (I).

Step 5

Attach the Canopy(H) to the Mounting Plate (J) and fix it

by turning the Canopy Nut (G) clockwise.

*Parallel Cord(round&smooth)

*Parallel Cord(square&ridged)

Clear,Brown,Gold or Black without Tracer(colored stripes)

Clear,Brwn,Gold or Black without Tracer(colored stripes)

Insulated Wire(not green)with copper metal conductor

Insulated Wire(not green)with Silver metal conductor

Connect,Hot,Black or Red outlet Supply Wire to:

Connect,Neutral,White Outlet Supply Wire to:

Black

White

2/3