Instructions / Assembly

Installation
Step 1
Unpack all parts from cartons carefully
Installing the mounting bar(A) with screws(A1) to
the outlet box
Step 2 Wire connection
*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
ridged and the hot wire will be round in shape and smooth.(See illustration on left)
Step 3
Orient the wall canopy to tighten lampbody to
the wall with bracket screw(F) by screwdriver.
Place the shade (D) on the lamp holder,
and secure it with socket ring (E)
Install bulbs (C). Be sure to use bulb with wattage
no greater than specified on this fixture
Step 4
Consult a qualified electrician to ensure correct branch
circuit conductor
ENJOY YOUR LAMP
Connect,Neutral,White Outlet Supply Wire to:
Insulated Wire(not green)with copper metal conductor
Clear,Brown,Gold or Black without Tracer(colored stripes)
*Parallel Cord(round&smooth)
Black
Connect,Hot,Black or Red outlet Supply Wire to:
Insulated Wire(not green)with Silver metal conductor
Clear,Brwn,Gold or Black without Tracer(colored stripes)
*Parallel Cord(square&ridged)
White