Installation Guide

Before beginning the assembly of the product, make sure all parts are present.

Compare the parts with the package contents list and hardware contents list.

If any parts are missing or damaged, do not attempt to assemble the product.

Tool required for assembly (included): Allen Key.

PREPARATION

Step 1: attach the back (B) and front (A) to the support (E) by using

the Allen Screw (H1) and tighten all with the Allen Key (H3) as

shown on the picture.

Step 2: attach the side (D) to the frame as shown on the picture

and use the allen screw (H1) to attach it to the frame by using

the Allen Key (H3).

Step 3: put the seat (C) on top as shown on the picture and use

the screw (H2) to attach it to the frame by using a screwdriver.

Step 4: put the bottom (F) inside the frame as shown on the

picture.