Instructions / Assembly

Before beginning the assembly of the product, make sure all parts are present.

Compare the parts with the package contents list and hardware contents list.

If any parts are missing or damaged, do not attempt to assemble the product.

Tool required for assembly (included): Allen Key and wrench.

PREPARATION

Step 1: attach left side (D) to the seat (B) as shown on

the picture, using Allen Nut L (E3) and Allen Nut S (E4)

and tighten with the Allen Key (E6) and wrench (E5).

Then continue to fit with the Allen Bolt ( E2) with the

Allen key (E6). Make sure to tighten all positions before

continue step 2.

Step 2: attach right side (C) to the seat (B) as shown on

the picture with the same hardware used with step 1.

Step 3: attach the back (A) to the side (D) and (C) as

shown on the picture. Then use the Allen bolt L(E1)

and the Allen bolt S (E2) to fit the back (A) to the chair

by using the Allen key (E6).