Installation Guide

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
STEP 1 TURN THE FRAME SO THAT SWIVEL PANEL AND FRAME OFFSET BY 45°,THEN
INSERT ONE OF ALLEN KEY INTO THE HOLE. SEE ABOVE PICTURES.
STEP 2 ATTACHED FRAME (A)TO SEAT (B), USING HARDWARE(C),(D),(E) BY
ALLEN KEY(F), SEE ABOVE PICTURE.
STEP 3 AFTER FRAME AND SEAT PANEL ARE SECURELY TIGHTENED, TAKE OFF THE
ALLEN KEY(F)FROM STEP 1 AND SWIVEL THE FRAME BY 45° IN THE OPPOSITE
DIRECTION. THEN USING HARDWARE(C),(D),(E) BY ALLEN KEY TO REMAINING
INSTALLATION HOLES.
STEP 4 TURN OVER THE PRODUCTS. THE ASSEMBLY IS FINISHED
PREPARATION
You may need some assistance
turning the frame ask someone
to hold the swivel panel