Instructions / Assembly

CARE AND MAINTENANCE

Spot clean using a mild water-free solvent. Only a professional cleaner shuould

undertake a complete overall cleaning.

The use of steam or water-based cleaners may cause excessive shrinking or staining.

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this

item

* This item should be assembled on a soft surface to prevent scratching the finish

during assembly

* This item may require periodic tightening

Model# BST7000A

Product Dimensions: 22.05"Wx20.08"Dx36.55"H

Part Lise and Hardware List

Backrest

Chair Leg

Footrest

Apron with swivel plate

Cushion seat

JDBC Scew M6×30mm

JDBC Scew M6× 45mm

Spring Washer M6×10mm

Flat Washer M6×16mm

Allen Key Small M4

18X

22X

12X

JDBC Scew M6× 35mm

Weight Capacity:275 lbs

Warming:Do not stand on chair

Warming:Do not over torque bolts

PIECE DESCRIPTION PICTURE QUANTITY

WARNING

PAGE 1
CARE AND MAINTENANCE Spot clean using a mild water-free solvent. Only a professional cleaner shuould undertake a complete overall cleaning. The use of steam or water-based cleaners may cause excessive shrinking or staining.
PAGE 2
PREPARATION Before beginning assembly of product make sure all parts are present.Compare parts with package contents list and hardware contents list. If any part is missing or damaged,do not attempt to assemble the product. Estimated Assembly Time:10 minutes. Tools Required for Assembly(included):Allen Key 1 2 3 4x 6 4 c 5 4x 2 5 4 5 6 3 1 6X 6 8x B E 5 D 3 A 4 6 Step 1 Step 2 Step 3 Attach 4 chair legs (B) to swivel plate(D) with 35mm screw (3)& 10&16mm washer(4)(5).