Instructions / Assembly

CARE AND MAINTENANCE

Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a

complete overall cleaning.

The use of steam or water-based cleaners may cause excessive shrinking or staining.

Model# ACH4003

Product Dimensions::27.5" W x 32" D x 32.25" H

NOTICE Weight Capacity: 275 lbs

* Please make sure that you have all parts indicated before you begin assembly of this

item

* This item should be assembled on a soft surface to prevent scratching the finish during

assembly

* This item may require periodic tightening

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY

A Seat Body 1X

B Front Leg 2X

C Rear Leg 2X

HW1 Allen bolt ( 8 x 1.25 x 55 mm ) 8X WARNING: DO NOT STAND ON CHAIR

HW2 Spring washer (8mm ) 8X WARNING: DO NOT OVER TORQUE BOLTS/SCREWS

HW3 Flat washer (8mm) 8X

HW4 Allen key 1X

The legs and hardware are located in the small box underneath

the chair in the zipper compartment.

PAGE 1
CARE AND MAINTENANCE Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a complete overall cleaning. The use of steam or water-based cleaners may cause excessive shrinking or staining. Model# ACH4003 Product Dimensions::27.5" W x 32" D x 32.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. Tools Required for Assembly (included): Allen Key STEP1 OPEN THE ZIPPER ON THE UNDERSIDE OF THE SEAT AND TAKE OUT LEGS AND HARDWARE. STEP2 PUT THE WASHERS ON THE BOLT IN THE ORDER SHOWN IN THE PICTURE.